Basic Info.
Certification
CE, ISO9001
Work Temperature
Normal Temperature
Feature
Wear-Resistant, Flame-Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, High Efficiency/ Low-Noise
Control Mode
Positive/Negative Flow Control
Shipment
Air/Sea/DHL/FedEx
Term
Fob & CIF & CFR & EXW
Specification
Oringnal size
Product Description
We can supply below pumps/motors, and pumps parts-regulators, can use for Piling Machinery,Pile driver,Drum Roller,Port Machinery Revolver for bulk container,Marine engineering,Concrete Machinery,Construction machinery/Engineering Machinery etc.
We regularly stock parts like: Ball Guides, Bearings, Block Springs & Disc Springs, Cylinder Blocks & Valve Plates, Housings & Casings, Pilot Pumps, Piston Sets, Seal Kits, Set Plates, Shoe Plates, Shafts, Swash Plate Assemblies, Bolts & Screws and much, much more
Regulator
The regulator is to change the inclination of the inclined plate by adjusting the adjusting bolts on the pump body and the valve plate of the regulator to change the plunger stroke to change the maximum flow rate, the minimum flow rate, the power control and the control degree of the flow.
Adjuster changes inclination angle of inclined disk (single pump)
In the servo piston size head cavity all the limited bit screw, so by adjusting the limit screw can adjust the maximum or minimum stroke of the servo piston, to adjust the maximum flow of the pump or the minimum flow effect. As shown in the picture, the green circle is a limited screw with small head (near the driving shaft), and the blue one is a large head fiber screw.
By adjusting the size screw, the pump flow can be increased or reduced.
Two, proportional solenoid valve
Proportional solenoid valve variable control process: engine speed sensor, electronic controller, proportional solenoid valve and proportional solenoid valve output oil pressure into the main pump variable plunger to control the output flow of the pump. At any speed, the power of the hydraulic pump is basically the same as that of the engine.
Series | K3V Series | K5V Series | K7V Series |
SIZE | 63 | 112 | 140 | 180 | 280 | 80 | 140 | 160 | 200 | 212 | 63 | 125 | 140* | 160* | 180* | 240* | 280* |
Max. displacement [cm3] | 63 | 112 | 140 | 180 | 280 | 80 | 140 | 160 | 200 | 214 | 65 | 130 | 140 | 160 | 180 | 242 | 280 |
Pressure[MPa] | rated. | 34.3 | 34.3 | 35.0 |
peak. | 39.2 | 39.2 | 40.0 |
Speed [min-1] | max. for self-priming | 2,650 | 2,360 | 2,150 | 1,950 | 1,600 | 2,460 | 2,160 | 2,000 | 1,900 | 2,000 | 2,650 | 2,360 | 2,100 | 2,100 | 2,000 | 1,820 | 1,800 |
max. | 3,250 | 2,700 | 2,500 | 2,300 | 2,000 | 3,000 | 2,500 | 2,350 | 2,200 | 2,000 | 2,950 | 2,700 | 2,450 | 2,450 | 2,300 | 2,100 | 2,100 |
Torque[N·m] | 343 | 588 | 1,120 | 1,950 | 529 | 843 | 1,120 | 1,500 | 415 | 902 | 1,500 | 2,000 | 2,500 |
Mass[kg] | 81 | 125 | 160 | 270 | 81 | 125 | 160 | 206 | 84 | 140 | 187 | - | 290 |
Product Description
Spring is an indispensable part of the regulator, which plays an important role in the operation of the regulator. China Hydraulic Mechanical and Electrical Co., LTD strictly checks the technology and production of spring manufacturers, and chooses domestic and foreign first-class spring manufacturers for cooperation. Spring into the factory before the need for millions of compression tests, after reaching the standard can be identified as qualified products, to ensure that the tensile performance and service life of the spring to maximize.
In line with DIN EN 10270-2 valve spring wire high strength, surface hardening, ultra-clean, peeling, crack test heat treatment process: 300-400°C tempering, surface treatment: shot peening + oil.
Each regulator is in the perfect quality management system for research and development, production, testing, packaging and transportation, each link is a strict professional quality management and control, so that customers have the rest of the quality products, enjoy the enthusiasm, professional, reliable after-sales service!
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in anti-rust treatment/polybag/foam boards and wooden cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: 100% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDP, DDU.
Q4. How about your delivery time?
A: Generally, it will take 5 to 10 days after receiving your advance payment if there are stock, otherwise it will take 20-25days. The specific delivery time depends on the items and the quantity of your order.
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the freight.
Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery to ensure the quality of products.
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from. Our Advantages
- We have a factory that produce pump parts of KPM K3V/K5V/K7V series, The quality can be up to the same quality as the Kawasaki , but the price is far below them. It has good cost performance because our boss has been in the hydraulic industry for 36 years, he is specializing in this technical research and is seriously at quality. If you have a market there, it will be a great advantage.
- In addition, there is a warehouse can also providing a variety of hydraulic parts for import brands such as Parker , Eaton, KPM, Kawasaki, Rexroth , Calzoni , Yuken, KYB, Hawei, XGCM, Hitachi etc.
- Packaging: Adopt a variety of packaging and multiple protection to ensure the integrity of products.
- Double plastic bags: the inner layer is rust and oil proof, and the outer layer is double protection to prevent rain from affecting the external packaging and then affecting the product
- High elastic foam paper: secure and provide close protection to the product
- Wooden case: prevent direct impact on products during transportation
- Logistics: The company is equipped with logistics department and freight drivers to ensure the safety and timely delivery of goods to the designated place/warehouse/port.
- Certificates: CE/AC (Russian customs union ) /Certificate of Occupation heath & safety managment system/Certificate of Quality managment system/Certificate of Environmental managment system etc.
- Our factory is closed to Shanghai port .
Certifications
Address:
The Intersection of Huguang West Road and Peacock Terrace Road, Hi Tech Zone, Hefei, Anhui, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, ISO 20000
Company Introduction:
Anhui Zhongye Electromechanical Technology Co., Ltd. (hereinafter referred to as: Zhongye Electromechanical) is located in 19-1, Building 19, Liandong U Valley, High-tech Zone, Hefei City, Anhui Province, with a total investment of more than 300 million yuan. It is a high-tech enterprise specializing in the research and development, manufacturing and technical services of various hydraulic components such as hydraulic plunger pumps, hydraulic valves, hydraulic motors, and hydraulic cylinders. Its predecessor was Anhui Boyi Fluid Power Transmission Joint Stock Co., Ltd. In order to expand operations and increase export trade business, Mr. Min Yu Chun, the chairman of the board, specially introduced two directors with foreign investment experience and established Anhui Zhongye Electromechanical Technology Co., Ltd.
Zhongye Electromechanical is currently establishing a domestic advanced and internationally recognized physical and chemical inspection and testing center and hydraulic component testing and testing center. At the same time, the company will be equipped with military-grade, a full set of heat treatment workshops and a full set of imported processing and testing equipment. Precise production provides a reliable guarantee.
Zhongye Electromechanical has established a research and development team of three generations of old, middle and young generations. The old military experts who graduated from Shanghai Jiaotong University and China Southern Airlines in the 1960s are the academic leaders. Application on our products. With a group of hydraulic professionals who graduated in the 1980s and 1990s as the backbone, we have worked hard on product production quality, theory, details, methods and means to ensure the stability of product batches. There are many more professionals who have just graduated. With their passion and divergent ideas, they give eclectic ideas and proposals in many aspects, and give full play to their learning consciousness and potential to experiment from various aspects., Tracking, summarizing, and improving, to ensure that our team not only has successors, but also can accumulate a lot.